Machine Features:

	Quality Used Packaging Machine
	Remcor Liquid Cooling System
	Jacketed Stainless Pipe
	Spare Parts
	Manufacture Date: 1995
	Technical Data
	Output: 5,000 suppositories/h
	Capacity of product tank: 30 lt. heated double jacketed electric immersion element
	Max Diameter of packaging material reels: 300mm
	Max film width: 65mm
	Packaging materials:
	Aluminium; duplex (ALU/PE), triplex (PP/ALU/PE): thickness: 70/100 microns
	Plastic Film; PVC, PVC/PE, PVC/PVDC/PE and other thermoforming materials: thickness: 100/200 microns
	Machine controlled by PLC
	Cooling time: 20 minutes
	Min temperature of cooling air: 5 degrees Celsius
	Power of cooling group: 3600 W
	Pneumatic equipment with 0.3 microns filtered air
	Compressed air consumption: aluminium foil: max 30 NL/min - plastic film: max 130 NL/min
	Rated pressure: 6 bar
	Cooling Water: 3 / 5 L/min
	Nominal installed power (indicative): 10KW
	Control circuit: 24 V.d.c
	Standard power supply: 230/400V, 3-phases + N + Gnd., 50Hz
	Noise level: below the 78dB (A)
	Dimensions (indicative) 1860 x 1648 x 2465 height
	Height from floor of strip outfeed: 940 mm
	Approx. Weight: SAAS 2 AP: 1210 Kg

Note: Unless otherwise stated in writing by HealthStar, the equipment is used and is sold or leased “AS IS”. All sales are subject to HealthStar’s then-current Terms and Conditions of Sale. All manufacturer and product names and logos are trademarks or registered trademarks of their respective holders. The HealthStar name, logo, and HealthStar product names are trademarks or registered trademarks of HealthStar, Inc. Unless otherwise stated in writing, HealthStar is not affiliated with, sponsored by, or authorized to act on behalf of any other manufacturer listed in this material. HealthStar aims to provide accurate information but it assumes no liability for errors or omissions in the content of this material. All specifications are subject to change without notice and all equipment is subject to prior sale or other disposition.